Tantalum Niobium Series-陕西奥羽达新材料有限公司-钽产品-铌产品-钛及钛合金产品-铪产品

Welcome to Shanxi AoYuDa New Materials Co., Ltd Official website！

中文版 |

Hot keywords：

Your location： HOME > PRODUCT

PRODUCT

Tantalum wire

Brand: TA1, TA2, taw2.5, taw7.5, taw10, tanb3, tanb20, tanb40, etc; Standard: gb/t3463-1995; Purity: purity of tantalum is more than 99.95%; State: annealed (m) or hard (y); Size: disc wire: Φ 0.6~ Φ 5mm Straight wire: Φ 1. ~ Φ 3*l2m (max)… 【MORE】
Tantalum wire

Brand: TA1, TA2, taw2.5, taw7.5, taw10, tanb3, tanb20, tanb40, etc; Standard: gb/t3463-1995; Purity: purity of tantalum is more than 99.95%; State: annealed (m) or hard (y); Size: disc wire: Φ 0.6~ Φ 5mm Straight wire: Φ 1. ~ Φ 3*l2m (max)… 【MORE】
Tantalum wire

Brand: TA1, TA2, taw2.5, taw7.5, taw10, tanb3, tanb20, tanb40, etc; Standard: gb/t3463-1995; Purity: purity of tantalum is more than 99.95%; State: annealed (m) or hard (y); Size: disc wire: Φ 0.6~ Φ 5mm… 【MORE】
Tantalum foil

A material. Tantalum foil is bright, no crack, no peeling, no folding, no obvious oxidation, impurity press in and other defects. … 【MORE】
Tantalum foil

A material. Tantalum foil is bright, no crack, no peeling, no folding, no obvious oxidation, impurity press in and other defects. … 【MORE】
Tantalum foil

A material. Tantalum foil is bright, no crack, no peeling, no folding, no obvious oxidation, impurity press in and other defects.… 【MORE】
Tantalum tube

Brand: TA1 Purity: 99.95% Standard: national standard or American Standard… 【MORE】
Tantalum tube

Brand: TA1 Purity: 99.95% Standard: national standard or American Standard… 【MORE】
Tantalum tube

Brand: TA1 Purity: 99.95% Standard: national standard or American Standard… 【MORE】
Niobium plate

Brand: NB1 Nb2 Purity: ≥ 99.95% 99.99 Executive standard: ASTM b393-05 or GB / T 3630-2006… 【MORE】
Niobium plate

Brand: NB1 Nb2 Purity: ≥ 99.95% 99.99 Executive standard: ASTM b393-05 or GB / T 3630-2006… 【MORE】
Niobium plate

Brand: NB1 Nb2 Purity: ≥ 99.95% 99.99 Executive standard: ASTM b393-05 or GB / T 3630-2006… 【MORE】
Tantalum rod

Brand: TA1, TA2 Purity: 99.95% and 99.99% Executive standard: ASTM B 365 gb/t26012-2010… 【MORE】
Tantalum rod

Brand: TA1, TA2 Purity: 99.95% and 99.99% Executive standard: ASTM B 365 gb/t26012-2010… 【MORE】
Tantalum rod

Brand: TA1, TA2 Purity: 99.95% and 99.99% Executive standard: ASTM B 365 gb/t26012-2010… 【MORE】
Tantalum target

Brand: TA1 Purity: 99.95% Standard: national standard or American Standard… 【MORE】
Tantalum target

Brand: TA1 Purity: 99.95% Standard: national standard or American Standard… 【MORE】
Niobium target

Brand: NB1 Nb2 Purity: ≥ 99.95% 99.99 Executive standard: ASTM b393-05 or GB / T 3630-2006… 【MORE】
Tantalum round target

Brand: r05200, r05400, TA1, TA2, ta10w, ta2.5w Purity: 99.95% Standard: ASTM b708-05… 【MORE】
Tantalum round target

Brand: r05200, r05400, TA1, TA2, ta10w, ta2.5w Purity: 99.95% Standard: ASTM b708-05… 【MORE】
Tantalum round target

Brand: r05200, r05400, TA1, TA2, ta10w, ta2.5w Purity: 99.95% Standard: ASTM b708-05… 【MORE】
Niobium crucible

Brand: NB1 Nb2 Purity: ≥ 99.95% 99.99 Executive standard: ASTM b393-05 or GB / T 3630-2006… 【MORE】
Niobium crucible

Brand: NB1 Nb2 Purity: ≥ 99.95% 99.99 Executive standard: ASTM b393-05 or GB / T 3630-2006… 【MORE】
Niobium crucible

Brand: NB1 Nb2 Purity: ≥ 99.95% 99.99 Executive standard: ASTM b393-05 or GB / T 3630-2006… 【MORE】
Niobium crucible

Brand: NB1 Nb2 Purity: ≥ 99.95% Executive standard: ASTM b393-05 or GB / T 3630-2006… 【MORE】
Niobium crucible

Brand: NB1 Nb2 Purity: ≥ 99.95% Executive standard: ASTM b393-05 or GB / T 3630-2006… 【MORE】
Niobium crucible

Brand: NB1 Nb2 Purity: ≥ 99.95% Executive standard: ASTM b393-05 or GB / T 3630-2006… 【MORE】
Niobium crucible

Brand: NB1 Nb2 Purity: ≥ 99.95% Executive standard: ASTM b393-05 or GB / T 3630-2006… 【MORE】
Niobium machined parts

Niobium workpieces have small thermal neutron absorption cross section, good corrosion resistance and high high temperature strength. … 【MORE】
Niobium machined parts

Niobium workpieces have small thermal neutron absorption cross section, good corrosion resistance and high high temperature strength. … 【MORE】
Niobium machined parts

Niobium workpieces have small thermal neutron absorption cross section, good corrosion resistance and high high temperature strength. … 【MORE】
Niobium machined parts

Niobium workpieces have small thermal neutron absorption cross section, good corrosion resistance and high high temperature strength. … 【MORE】
Niobium machined parts

Niobium workpieces have small thermal neutron absorption cross section, good corrosion resistance and high high temperature strength.… 【MORE】
Niobium machined parts

Niobium workpieces have small thermal neutron absorption cross section, good corrosion resistance and high high temperature strength.… 【MORE】
Niobium wafer

1. Product Name: niobium circle produced by the manufacturer pure niobium circle forged niobium circle 2. Process: forging and rolling 3. Brand: r04200, NB1 4. Purity: 99.95% pure niobium… 【MORE】
Niobium wafer

1. Product Name: niobium circle produced by the manufacturer pure niobium circle forged niobium circle 2. Process: forging and rolling 3. Brand: r04200, NB1 4. Purity: 99.95% pure niobium… 【MORE】
Niobium wafer

1. Product Name: niobium circle produced by the manufacturer pure niobium circle forged niobium circle 2. Process: forging and rolling 3. Brand: r04200, NB1 4. Purity: 99.95% pure niobium… 【MORE】
Niobium wafer

1. Product Name: niobium circle produced by the manufacturer pure niobium circle forged niobium circle 2. Process: forging and rolling 3. Brand: r04200, NB1 4. Purity: 99.95% pure niobium… 【MORE】
Niobium wafer

1. Product Name: niobium circle produced by the manufacturer pure niobium circle forged niobium circle 2. Process: forging and rolling 3. Brand: r04200, NB1 4. Purity: 99.95% pure niobium… 【MORE】
Tantalum machined parts

Because of the active reaction between tantalum and oxygen, tantalum workpieces must avoid heat treatment in an atmosphere even in the presence of a little air. Therefore, almost all annealing is carried out in a high vacuum, and the air tightness of the heating furnace must be very high.… 【MORE】
Tantalum machined parts

Because of the active reaction between tantalum and oxygen, tantalum workpieces must avoid heat treatment in an atmosphere even in the presence of a little air. Therefore, almost all annealing is carried out in a high vacuum, and the air tightness of the heating furnace must be very high.… 【MORE】
Tantalum machined parts

Because of the active reaction between tantalum and oxygen, tantalum workpieces must avoid heat treatment in an atmosphere even in the presence of a little air. Therefore, almost all annealing is carried out in a high vacuum, and the air tightness of the heating furnace must be very high… 【MORE】
Tantalum machined parts

Because of the active reaction between tantalum and oxygen, tantalum workpieces must avoid heat treatment in an atmosphere even in the presence of a little air. Therefore, almost all annealing is carried out in a high vacuum, and the air tightness of the heating furnace must be very high.… 【MORE】
Tantalum machined parts

Because of the active reaction between tantalum and oxygen, tantalum workpieces must avoid heat treatment in an atmosphere even in the presence of a little air. Therefore, almost all annealing is carried out in a high vacuum, and the air tightness of the heating furnace must be very high.… 【MORE】
Tantalum machined parts

Because of the active reaction between tantalum and oxygen, tantalum workpieces must avoid heat treatment in an atmosphere even in the presence of a little air. Therefore, almost all annealing is carried out in a high vacuum, and the air tightness of the heating furnace must be very high.… 【MORE】
Tantalum machined parts

Because of the active reaction between tantalum and oxygen, tantalum workpieces must avoid heat treatment in an atmosphere even in the presence of a little air. Therefore, almost all annealing is carried out in a high vacuum, and the air tightness of the heating furnace must be very high.… 【MORE】
Tantalum machined parts

Because of the active reaction between tantalum and oxygen, tantalum workpieces must avoid heat treatment in an atmosphere even in the presence of a little air. Therefore, almost all annealing is carried out in a high vacuum, and the air tightness of the heating furnace must be very high… 【MORE】
Tantalum machined parts

Because of the active reaction between tantalum and oxygen, tantalum workpieces must avoid heat treatment in an atmosphere even in the presence of a little air. Therefore, almost all annealing is carried out in a high vacuum, and the air tightness of the heating furnace must be very high… 【MORE】
Tantalum machined parts

Because of the active reaction between tantalum and oxygen, tantalum workpieces must avoid heat treatment in an atmosphere even in the presence of a little air. Therefore, almost all annealing is carried out in a high vacuum, and the air tightness of the heating furnace must be very high… 【MORE】
Tantalum machined parts

Because of the active reaction between tantalum and oxygen, tantalum workpieces must avoid heat treatment in an atmosphere even in the presence of a little air. Therefore, almost all annealing is carried out in a high vacuum, and the air tightness of the heating furnace must be very high… 【MORE】
Tantalum machined parts

Because of the active reaction between tantalum and oxygen, tantalum workpieces must avoid heat treatment in an atmosphere even in the presence of a little air. Therefore, almost all annealing is carried out in a high vacuum, and the air tightness of the heating furnace must be very high… 【MORE】
Tantalum machined parts

Because of the active reaction between tantalum and oxygen, tantalum workpieces must avoid heat treatment in an atmosphere even in the presence of a little air. Therefore, almost all annealing is carried out in a high vacuum, and the air tightness of the heating furnace must be very high… 【MORE】
Tantalum machined parts

Because of the active reaction between tantalum and oxygen, tantalum workpieces must avoid heat treatment in an atmosphere even in the presence of a little air. Therefore, almost all annealing is carried out in a high vacuum, and the air tightness of the heating furnace must be very high… 【MORE】
Tantalum machined parts

Because of the active reaction between tantalum and oxygen, tantalum workpieces must avoid heat treatment in an atmosphere even in the presence of a little air. Therefore, almost all annealing is carried out in a high vacuum, and the air tightness of the heating furnace must be very high… 【MORE】
Tantalum machined parts

Because of the active reaction between tantalum and oxygen, tantalum workpieces must avoid heat treatment in an atmosphere even in the presence of a little air. Therefore, almost all annealing is carried out in a high vacuum, and the air tightness of the heating furnace must be very high… 【MORE】
Tantalum machined parts

Because of the active reaction between tantalum and oxygen, tantalum workpieces must avoid heat treatment in an atmosphere even in the presence of a little air. Therefore, almost all annealing is carried out in a high vacuum, and the air tightness of the heating furnace must be very high… 【MORE】
Tantalum machined parts

Because of the active reaction between tantalum and oxygen, tantalum workpieces must avoid heat treatment in an atmosphere even in the presence of a little air. Therefore, almost all annealing is carried out in a high vacuum, and the air tightness of the heating furnace must be very high… 【MORE】
Tantalum machined parts

Because of the active reaction between tantalum and oxygen, tantalum workpieces must avoid heat treatment in an atmosphere even in the presence of a little air. Therefore, almost all annealing is carried out in a high vacuum, and the air tightness of the heating furnace must be very high… 【MORE】
Tantalum machined parts

Because of the active reaction between tantalum and oxygen, tantalum workpieces must avoid heat treatment in an atmosphere even in the presence of a little air. Therefore, almost all annealing is carried out in a high vacuum, and the air tightness of the heating furnace must be very high… 【MORE】
Tantalum machined parts

Because of the active reaction between tantalum and oxygen, tantalum workpieces must avoid heat treatment in an atmosphere even in the presence of a little air. Therefore, almost all annealing is carried out in a high vacuum, and the air tightness of the heating furnace must be very high… 【MORE】
Tantalum machined parts

Because of the active reaction between tantalum and oxygen, tantalum workpieces must avoid heat treatment in an atmosphere even in the presence of a little air. Therefore, almost all annealing is carried out in a high vacuum, and the air tightness of the heating furnace must be very high… 【MORE】
Tantalum machined parts

Because of the active reaction between tantalum and oxygen, tantalum workpieces must avoid heat treatment in an atmosphere even in the presence of a little air. Therefore, almost all annealing is carried out in a high vacuum, and the air tightness of the heating furnace must be very high… 【MORE】
Tantalum cone

Because of the active reaction between tantalum and oxygen, tantalum workpieces must avoid heat treatment in an atmosphere even in the presence of a little air. Therefore, almost all annealing is carried out in a high vacuum, and the air tightness of the heating furnace must be very high… 【MORE】
Tantalum cone

Because of the active reaction between tantalum and oxygen, tantalum workpieces must avoid heat treatment in an atmosphere even in the presence of a little air. Therefore, almost all annealing is carried out in a high vacuum, and the air tightness of the heating furnace must be very high… 【MORE】
Tantalum cone

Because of the active reaction between tantalum and oxygen, tantalum workpieces must avoid heat treatment in an atmosphere even in the presence of a little air. Therefore, almost all annealing is carried out in a high vacuum, and the air tightness of the heating furnace must be very high… 【MORE】
Tantalum cone

Because of the active reaction between tantalum and oxygen, tantalum workpieces must avoid heat treatment in an atmosphere even in the presence of a little air. Therefore, almost all annealing is carried out in a high vacuum, and the air tightness of the heating furnace must be very high… 【MORE】

Product

Tantalum Niobium Series

Silk material
Foil material
Pipe
board
Bar
Target material
crucible
Machined parts

Titanium and titanium alloy series

Hafnium series

Zirconium series

Cobalt series

Vanadium series

Recommended information

Hotline

+86 18292768861

AddressQing'anbao Industrial Park, Baotai Road, High tech Zone, Baoji City, Shaanxi Province

E-mailaoyuda0917@163.com

TEL（+86）0917-3336577

Shanxi AoYuDa New Materials Co., Ltd© copyright

Website production：Website production

aoyuda WAP

>Wechat Wechat

LINK：

X

Hotline：+8615191788646

QQ QQ

Wechat

Wechat